- 8 -
The default IP address of the VMware ESXi host on whose virtual machine the ZPLS module is running
is 192.168.0.10/24. You can change this address (and other network settings) to suit your IP
addressing scheme.
To change VMware host's networking address:
1. Connect the RJ-45 connector on one end of the Ethernet cable to the device's Gigabit
Ethernet port #1 (located on the rear panel) and then connect the other end of the cable to
your computer (or laptop).
Figure 4: Connecting AudioCodes Mediant 800C Device to Network
2. Change your computer's IP address (e.g., 192.168.0.100/24) so that it's in the same subnet as
the default address of the VMware host.
3. On your computer, open any Web browser, and browse to URL address 192.168.0.10; the
VMware host's login screen appears:
4. Enter the default login credentials:
• Username: root
• Password: Audc1234@!
To Next Page
Loading...
