Audiovox AVE9103 - Customizing the Function Settings; Video Setup; System Setup

E - 22
CUSTOMIZING THE FUNCTION SETTINGS
Enter:
Video Setup
1. In STOP mode, press the SETUP button.
2. Use the or button to select Video Setup.
3. Press the / ENTER button to highlight TV Type.
4. Press the / ENTER button to enter.
5. Use the or button to select the desired TV type and press the
ENTER button to confirm.
6. Press the button to go back to the previous menu.
7. To exit the SETUP MENU and return to the normal screen, simply
press SETUP button or press the or button to highlight the
Exit Setup Mode and press the ENTER button.
TV Type
Pan Scan
• When wide-screen video is played, this mode clips the right and
left sides of the image so that it can be viewed on a conventional
screen.
• Somewide-screenDVDsthatdonotpermitPanScanmodeplayback
are automatically played in letterbox mode (black bands that appear
at the top and bottom of the screen).
Letter Box
• Whenwide-screenvideoisplayedinthismodeonaconventional
screen, black bands appear at the top and bottom of the screen.
Wide screen
• Thisisthecorrectmodeforplayingwide-screenvideosontheunitor
other external wide-screens.
NOTE:
• The displayable picture size is preset on the DVD.Therefore the
playback picture of some DVDs may not conform to the picture size
you select.
• WhenyouplayDVDsrecordedinthe4:3aspectratio,theplayback
picture will always appears in the 4:3 aspect ratio regardless of the
TV TYPE setting.
•  If the screen mode is still not correct, press the FORMAT button
repeatedly to adjust it.
System Setup
1. In STOP mode, press the SETUP button.
2. Use the or button to select System Setup.
3. Press the
/ ENTER button to enter.
4. Use the
or button to select Default item.
5. Press the /ENTER button to enter.
4. Use the or button to select the desired setup option and press
the ENTER button to confirm.
NOTE: If set as Yes, it takes 3-5 seconds to reset the DVD settings to
the factory default.
7. Press the button to go back to the previous menu.
8. To exit the SETUP MENU and return to the normal screen, simply
press SETUP button or press the
or button to highlight the Exit
Setup Mode and press the ENTER button.
Enter:
Cut off when a wide-screen
video image is played.