Audiovox AVE9103 - Playing a Disc; Playing a Disc Basics; Fast Forward and Reverse

E - 16
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced in a manner
that allows specific or limited operation during playback. Such as, the unit may not respond to all
operating commands. This is not a defect in the unit. Refer to the instruction notes of discs.
“
” may appear on the screen during operation. A “ ” means that the desired operation is not
permitted by the unit or disc.
Playing a Disc
1. Press the ON/OFF button to turn on the unit.
2. Press the DVD/TV/RADIO button (the FUNCTION button on the remote) to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 3.
3. Press the
OPEN/CLOSE button. The disc tray opens.
4. Place a disc onto the disc tray with the label side up.
5. Press the
OPEN/CLOSE button. The disc tray closes.
It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring you
to the main menu of the DVD or start playback of the disc.
6. If the unit does not automatically start playing the DVD, press the
PLAY button.
Pausing Playback (Still Mode)
Press the PAUSE button on the remote control. To resume normal playback, press the PLAY button. Each
time you press the
PAUSE button, the picture advances one frame in DVD mode.
Stopping Playback
Press the STOP button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the PLAY button.
If you press the
STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will
reset the disc to the beginning.
Skipping to a Different Chapter/Track
• Pressthe PREV button repeatedly to skip to the start of the current or previous chapter/track.
• Pressthe
NEXT button to skip to the next chapter/track.
• ForanaudioCD,usethenumberbuttons(remotecontrolonly)togodirectlytothattracknumber.
Fast Forward/Fast Reverse
1. Press the TUNING or TUNING button on the remote control when a disc is playing.
• Thediscbeginsfastscanatx2speed.
• Sixspeedsareavailable.Eachtimethe TUNING or TUNING button is pressed, the speed of fast
scan changes in the following sequence:
PLAYING A DISC
2. Press the PLAY button when you have reached the desired point to resume playback at normal
speed.
NOTE:
• TheDVDplayermutessoundduringreverseandforwardscanofDVDvideodiscs.
• Thefastplaybackspeedmaydifferdependingonthedisc.
• When MUTE is pressed, the sound is mute and the “ ” indicator always
blinks on the LCD display until MUTE is pressed again or VOL is pressed.