Why is there flashing image or interference on Audiovox Car Receiver screen?
If you're seeing a flashing image or interference on the screen of your Audiovox Car Receiver, it could be due to the DVD not being compatible with the current TV system settings; try changing the setup to accommodate the disc. Also, check the wiring for improper video signal connections and correct them.
What to do if disc does not play back on Audiovox Car Receiver?
If your disc isn't playing back on your Audiovox Car Receiver, it could be due to several reasons. The disc might be warped, scratched, dirty, or wet; use a disc in good condition and clean it with a soft cloth if necessary. The laser pickup could be dirty, so clean it with a cleaning disc. Ensure you're using a compatible disc with the proper region code, inserted with the label side up.
How to improve poor sound quality on Audiovox VME 9425 Car Receiver?
If you notice poor sound quality or distortion with your Audiovox Car Receiver, it could be due to using a pirated disc—try using an original copy. Also, ensure that the speaker power rating is compatible with the unit and check the speaker contact for any shorts.
What to do if there is no audio output from Audiovox VME 9425 Car Receiver?
If you're experiencing no or low audio output from your Audiovox Car Receiver, several factors could be responsible: * Check the wiring to ensure proper audio output connection. * Increase the volume level. * Review the wiring diagram and check the MUTE connection. * Inspect the speakers for damage and replace if necessary. * Adjust the channel balance to the center position if heavily biased. * Ensure speaker wiring isn't in contact with any metal parts of the car by insulating all speaker wiring connections.
How to fix Audiovox VME 9425 that will not power on?
If your Audiovox Car Receiver isn't powering on, it could be due to a blown fuse. Check both the radio fuse and the car battery fuse, and replace any blown fuses with new ones of the correct rating. Another reason may be illegal operation. In this case, press the RESET button located in the bottom right corner of the front panel.
How to fix an Audiovox VME 9425 Car Receiver that will not power on?
If your Audiovox Car Receiver isn't powering on, there are several potential causes. First, check the radio fuse and the car battery fuse; if either is blown, install a new fuse with the correct rating. If the fuses are fine, try pressing the RESET button located in the bottom right corner of the front panel, as this may resolve an illegal operation issue.
Why can't I repeat or search while playing a VCD on my Audiovox VME 9425 Car Receiver?
If you can't repeat or search while playing a VCD on your Audiovox Car Receiver, the PBC (Playback Control) function might be turned on. Try turning PBC off.
Why does my Audiovox VME 9425 show 'Bad Disc'?
If your Audiovox Car Receiver indicates 'Bad Disc', the disc might be dirty; try cleaning it with a soft cloth. Also, ensure the disc is inserted correctly, with the label side up.
Why does my Audiovox VME 9425 say 'No Disc'?
If your Audiovox Car Receiver displays 'No Disc', the disc may be dirty, so clean it with a soft cloth. Ensure that the disc is inserted with the label side up. Also, check that a disc is actually present in the loading compartment and insert one if it's missing.
What to do if I cannot insert a disc into my Audiovox VME 9425 Car Receiver?
If you cannot insert a disc into your Audiovox Car Receiver, it might be because there's already a disc inside the unit. Eject the current disc and then try inserting the new one.
General| Brand | Audiovox |
|---|---|
| Model | VME 9425 |
| Category | Car Receiver |
| Screen Size | 7 inches |
| Screen Resolution | 800 x 480 pixels |
| Touchscreen | Yes |
| DVD Player | Yes |
| CD Player | Yes |
| AM/FM Tuner | Yes |
| Presets | 30 |
| Remote Control | Yes |
| Power Output | 50 watts x 4 channels |
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| Navigation | No |
| Type | DVD Receiver |
| Inputs | USB, AUX |
| Outputs | RCA Preouts |
| Supported Formats | MP3, WMA, JPEG |
Details on DVD playback capabilities including fast forward and slow motion.
Specifications for CD, MP3, and WMA disc playback and compatibility.
Capabilities of the AM/FM tuner, including presets and frequency spacing.
Features for connecting and controlling Apple iPod and iPhone devices.
Identification and explanation of all front panel buttons and ports.
How to turn the unit on/off, mute audio, and select sources.
Detailed steps for adjusting bass, mid, treble, and filter frequencies.
List of vehicle functions controllable via steering wheel controls.
How to access sub-menus and adjust individual features.
Adjusting DRC, Loudness, Subwoofer, and EQ Q-factor settings.
Customizing LED colors, camera input, and video signal settings.
Explains on-screen indicators and touch keys for tuner functions.
Supported file formats and compatibility for MP3/WMA discs.
Connecting via HFP and detailed steps for pairing a mobile phone.
Troubleshooting power, audio output, and reset issues.
To Next Page
