Audix RAD-360 - Connecting Receiver to Audio Systems; Connecting Receiver to PA Systems; Connecting Receiver to Guitar Amplifiers

10
Connecting the Receiver:
The Audix RAD 360 features balanced and unbalanced outputs to allow you
to connect it to a wide variety of audio and instrument sound systems:
P. A. Application:
Connect the audio output of the RAD 360 Receiver to the audio input of your
PA system using a balanced (XLR) or unbalanced (1/4") cable (not included).
Guitar Application:
Connect the unbalanced (1/4") output of the RAD 360 Receiver to the input of
the guitar amplier.