Audix RAD-360 - Unpacking Your RAD-360 System; Checking System Components; Standard Package Contents

4
UNPACKING YOUR RAD-360:
Before beginning installation of your Wireless System, please check the list on
the side of your packing box for contents and be sure all the components are
included. Your system should include a combination of the following compo-
nents:
1. (1) RAD 360 Receiver
2. (1) RAD 360 Transmitter. This may be either a Handheld or Body
pack Transmitter.
a) If you have purchased a Bodypack system you will also
have one (1) mic to be plugged into the Bodypack.
b) If you purchased the guitar system, you will receive one (1)
guitar cable to plug into the Bodypack.
3. (1) Power Supply
4. (2) Antennas
5. (1) Rack Mount Kit and screws
6. (1) Padded carrying case
7. (1) 1/4" - 1/4" audio patch cable
8. (1) Screwdriver for changing settings on the Bodypack
Once you have veried each of these components is present, you are ready
to begin the installation of your RAD-360 System.