AUMA AUMATIC ACExC 01.2 - Page 84

ExplanationSetting valueDefaultAccessParameterTypeNo.
Number of torque switch OPEN
trippings
Min = 0 [s]R
Torque trip OPEN
U3260-9
Max = 4294967295 [s]
Total number of all time intervals
during which an on time warning
was indicated.
Min = 0 [s]R
On time warning 1
U3260-10
Max = 4294967295 [s]
Max. time span during which an
on time warning was indicated.
Min = 0 [s]R
On time warning 2
U3260-11
Max = 4294967295 [s]
Number of AUMATIC system
starts
Min = 0 [s]R
System starts
U3260-12
Max = 4294967295 [s]
Maximum temperature of con-
trols
Min = –100 [°C]R
Max. tem. controls
I3260-13
Max = +150 [°C]
Minimum temperature of con-
trols
Min = –100 [°C]R
Min. temp. controls
I3260-14
Max = +150 [°C]
Maximum temperature of motor
Min = –100 [°C]R
Max. temp. motor
I3260-15
Max = +150 [°C]
Minimum temperature of motor
Min = –100 [°C]R
Min. temp. motor
I3260-16
Max = +150 [°C]
Maximum temperature of gear-
box
Min = –100 [°C]R
Max. temp. gearbox
I3260-17
Max = +150 [°C]
Minimum temperature of gear-
box
Min = –100 [°C]R
Min. temp. gearbox
I3260-18
Max = +150 [°C]
Maximum temperature of MWG
Min = –100 [°C]R
Max. temp. MWG
I3260-19
Max = +150 [°C]
Minimum temperature of MWG
Min = –100 [°C]R
Min. temp. MWG
I3260-20
Max = +150 [°C]
Value = 1:Deleting operating
data
R/W
Reset operating data
I1660-21
Table 89: Event report
ExplanationSetting valueDefaultAccessParametersTypeNo.
Data length = 10 bytes
File size of event report
Min = 0548R
File size
U1661-1
Max = 1024
Save interval for event data from
buffer
Min = 100050000R
Save interval
U1661-2
Max = 65535
Max. number of events in the
buffer
Min = 1050R
Buffer size
U1661-3
Max = 100
The event filter for System
defines which system events are
to be recorded into the event
report.
0 : Commands
31R
System event filter
enum61-4
1 : Parameterization
2 : Enable processes
3 : System events
4 : Simulation
84
Actuator controls
Appendix AC 01.2/ACExC 01.2 Profibus DP