AUMA SAREx 14.2 - 15. Spare parts; 15.1. Multi-turn actuators SAEx 07.2 - SAEx 16.2;SAREx 07.2 - SAREx 16.2 KT;KM

116 pages

To Next Page

To Previous Page

15. Spare parts

15.1. Multi-turn actuators SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 KT/KM

103

SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical

ACExC 01.2 Intrusive Modbus RTU Spare parts

Main Page

Table of Contents2
Safety Instructions5
Prerequisites for the Safe Handling of the Product5
Range of Application6
Warnings and Notes7
References and Symbols7
Short Description8
Name Plate10
Transport and Storage14
Transport14
Storage16
Assembly17
Mounting Position17
Handwheel Fitting17
Mount Actuator to Valve17
Overview of Output Drive Types18
Output Drive Type a18
5.3.2.1. Multi-Turn Actuator with Output Drive Type A: Mount19
5.3.2.2. Stem Nut for Output Drive Type A: Finish Machining21
Output Drive Types B/C/D and E22
5.3.3.1. Multi-Turn Actuator with Output Drive Type B: Mount23
Accessories for Assembly24
Stem Protection Tube for Rising Valve Stem24
Electrical Connection25
Basic Information25
Overview of AUMA Electrical Connections27
KT/KM Electrical Connection28
Terminal Compartment: Open29
Cable Connection30
Fieldbus Cables: Connect33
6.3.3.1. Fieldbus Connection for Line Topology33
6.3.3.2. Fieldbus Connection for Loop Topology35
Terminal Compartment: Close36
KP/KPH Electrical Connection37
Terminal Compartment: Open38
Cable Connection39
Fieldbus Cables: Connect40
Terminal Compartment: Close41
KES Electrical Connection42
Terminal Compartment: Open43
Cable Connection44
Fieldbus Cables: Connect45
Terminal Compartment: Close46
External Earth Connection47
Accessories for Electrical Connection48
Actuator Controls on Wall Bracket48
Parking Frame49
Operation50
Manual Operation50
Manual Valve Operation50
Motor Operation51
Operating the Actuator from Local Controls51
Actuator Operation from Remote52
Menu Navigation Via Push Buttons (for Settings and Indications)52
Menu Layout and Navigation53
User Level, Password54
Password Entry55
Password Change55
Timeout for Incorrect Password Entry56
Language in the Display56
Language Change56
Indications58
Indications During Commissioning58
Indications in the Display58
Feedback Signals from Actuator and Valve59
Status Indications According to AUMA Classification61
Status Indications According to NAMUR Recommendation62
Indication Lights of Local Controls63
Optional Indications64
Mechanical Position Indication Via Indicator Mark64
Signals (Output Signals)65
Status Signals Via Output Contacts (Digital Outputs)65
Assignment of Outputs65
Coding the Outputs65
Analogue Signals (Analogue Outputs)65
Commissioning (Basic Settings)66
Type of Seating: Set66
Fieldbus Address (Slave Address), Baud Rate, Parity and Monitoring Time: Set67
Open Switch Compartment67
Torque Switching: Set68
Limit Switching: Set69
End Position CLOSED (Black Section): Set69
End Position OPEN (White Section): Set69
Intermediate Positions: Set70
Running Direction CLOSE (Black Section): Set70
Running Direction OPEN (White Section): Set71
Test Run71
Direction of Rotation at Mechanical Position Indicator: Check71
Direction of Rotation at Hollow Shaft/Stem: Check72
Limit Switching: Check73
Reference Operation Position Feedback: Perform73
Close Switch Compartment73
Commissioning (Optional Equipment Settings)75
EWG 01.1 Electronic Position Transmitter75
Measuring Range: Set76
Current Values : Adjust77
LED End Position Signalling: Switch On/Off77
Potentiometer77
Potentiometer: Set78
RWG Electronic Position Transmitter78
Measuring Range: Set79
Mechanical Position Indicator: Set79
Corrective Action81
Faults During Commissioning81
Fault Indications and Warning Indications81
Fuses86
Fuses Within the Actuator Controls86
Fuse Replacement87
Replace Fuses87
Test/Replace Fuses87
Motor Protection (Thermal Monitoring)88
Servicing and Maintenance89
Preventive Measures for Servicing and Safe Operation89
Disconnection from the Mains90
Disconnection from the Mains with KT/KM Electrical Connection90
Disconnection from the Mains with KP/KPH and KES Electrical Connection91
Maintenance92
Disposal and Recycling92
Technical Data94
Technical Data Multi-Turn Actuators94
Technical Data Actuator Controls97
Tightening Torques for Screws102
Spare Parts103
Multi-Turn Actuators Saex103
Saex 16.2/Sarex 07.2103
Sarex 16.2 KT/KM103
Actuator Controls Acexc 01.2 KT/KM105
Actuator Controls Acexc 01.2 KP/KPH107
Actuator Controls AUMATIC Acexc 01.2 KES109
Index113

AUMA SAREx 14.2 - 15. Spare parts; 15.1. Multi-turn actuators SAEx 07.2 - SAEx 16.2;SAREx 07.2 - SAREx 16.2 KT;KM

Table of Contents

Other manuals for AUMA SAREx 14.2

Related product manuals