AUMA SG 05.1-F05 - Page 32

6. Enter password:
→
Press
4 x = 0000 (default factory password).
➥
Display indicates:
EDIT M010
LANGUAGE
LCD CONTRAST
7.
Press .
➥
Display shows the set value:
EDIT M010
LANGUAGE
ENGLISH
:EDIT C:ESC
8.
Press
again to enter the edit mode.
➥
Display indicates:
EDIT M010
LANGUAGE
ENGLISH
:EDIT :OK C:ESC
9. Set new value:
→
Press .
10. Accept value or cancel?
→
Accept value: Press
.
→
Cancel process without accepting the value: Press
C .
32
SG 05.1 – SG 12.1/SGR 05.1 – SGR 12.1 Control unit: electromechanic
Operation AC 01.1 Intrusive Modbus RTU