AUMA SG 05.1-FA07 User Manual

Part-turn actuators SG 05.1 – SG 12.1 / SGR 05.1 – SGR 12.1
Operation instructions AUMA NORM
14. Setting the torque switching 18
14.1 Setting 18
14.2 Checking the torque switches 18
15. Test run 19
15.1 Checking the direction of rotation 19
15.2 Checking the limit switching 19
16. Setting the potentiometer (option) 20
17. Setting the electronic position transmitter RWG (option) 21
17.1 Setting 2-wire system 4 – 20 mA and 3- /4-wire system 0 – 20 mA 22
17.2 Setting 3-/4- wire system 4 – 20 mA 23
18. Setting the mechanical position indicator 24
19. Closing the switch compartment 24
20. Setting the operating time 25
21. Enclosure protection IP 68 (option) 26
22. Maintenance 27
23. Lubrication 27
24. Disposal and recycling 28
25. Service 28
26. Spare parts list part-turn actuator SG(R) 05.1 – SG(R) 12.1 with plug/socket connector 29
Index 31
Addresses of AUMA offices and representatives 32

AUMA SG 05.1-FA07 Specifications

General

Brand	AUMA
Model	SG 05.1-FA07
Category	Controller
Language	English