AUMA SQ 05.2 Manual

NOTICE for use!
This document is only valid with the latest operation instructions attached to the device, the attached manual as
well as the respectively pertaining technical and electrical data sheets. They are understood as reference
documents.
Purpose of the document:
The present document informs about the actions required for using the device in safety-related systems in
accordance with IEC 61508 or IEC 61511.
Reference documents:
●
Operation instructions (Assembly and commissioning) for the actuator
●
Manual (Operation and setting) AC 01.2/ACExC 01.2 actuator controls
●
Manual (Device integration Fieldbus) AC(V) 01.2/AC(V)ExC 01.2 actuator controls
●
Technical data for part-turn actuator and actuator controls.
Reference documents are available on the Internet at: http://www.auma.com.
Table of contents Page
51. Terminology............................................................................................................................
51.1. Abbreviations and concepts
72. Application and validity.........................................................................................................
72.1. Range of application
72.2. Standards
72.3. Valid device types
83. Architecture, configuration and applications......................................................................
83.1. Architecture (actuator sizing)
93.2. Configuration (setting)/version
113.3. Protection against uncontrolled operation (self-locking/brake)
113.4. Operation mode (low/high demand mode)
113.5. Further notes and indications on architecture
123.6. Applications (environmental conditions)
134. Safety instrumented systems and safety functions...........................................................
134.1. Safety instrumented system including an actuator
134.2. Safety functions
144.3. Safe inputs and outputs
144.4. Redundant system architecture
154.5. Examples of applications
174.6. System representation
185. Installation, commissioning and operation.........................................................................
185.1. Installation
205.2. Commissioning
205.3. Operation
215.4. Lifetime
215.5. Decommissioning
226. Indications on display............................................................................................................
226.1. Status indications on SIL functions
236.2. SIL configuration warning
236.3. Backlight
2
Part-turn actuators
Table of contents with AC 01.2-SIL/ACExC 01.2-SIL

AUMA SQ 05.2 Specifications

General

Brand	AUMA
Model	SQ 05.2
Category	Controller
Language	English