AUMA SQ 05.2 Manual

Default values:
Signal DOUT 5 = SIL function active
Signal DOUT 6 = SIL fault
7.4. Signals via fieldbus of standard actuator controls
For actuator controls in fieldbus interface version, status information on the
safety-related functions is provided in the process representation.
Information
Status signals via fieldbus are not part of a safety function! They may not be integrated
in a safety-related system.They can be used as additional information on the
standard PLC, for example.
Signals available in process representation:
Safe ESD
Bit: Safe STOP
Bit: SIL fault
Bit: SIL function active
For further information on parameter configuration via fieldbus interface refer to
Manual (Device integration fieldbus).
26
Part-turn actuators
Signals with AC 01.2-SIL/ACExC 01.2-SIL

AUMA SQ 05.2 Specifications

General

Brand	AUMA
Model	SQ 05.2
Category	Controller
Language	English