LED Strip
Remember to always check the compatibility of the LED Strip, Driver and LED Strip Controller you will
be using or get in touch with us.
Most LED Strip lengths cannot be over 5M due to the possibility of Voltage Drop (LEDs near the end
of the Strip will appear dimmer or may not be turned on).
You can run multiple lengths in parallel if the Driver and Controller can handle the total wattage.
The Single Colour Controller requires a 2 Core cable for the LED Strip
The Colour Tunable Controller requires a 3 Core cable (Warm White / Cool White / Power)
The RGBCX Controller requires a 6 Core cable (Warm White / Cool White / Red / Green / Blue /
Power)
Most Single Colour and Colour Tunable LED Strips will be fully compatible with the AOne Controllers.
Most RGB LED Strips on the market are RGBW or simply RGB (they don’t have separate LED Chips for
Warm White / Cool White) meaning that you will not be able to use all the features available on the
AOne Controller.
We recommend checking that the RGB LED Strip you are purchasing has individual Chips for RGBCX
(6 Cores).
While RGB and RGBW LED Strips can work, the LED Strip Controller has no way of differentiating
between a full LED Strip and an RGB or RGBW one.
This means the App will display the Colour Tuning Slider but it will not control anything and the LED
Strip may appear as Off until a colour from the Colour wheel is selected.
The Recommended RGBCX LED Strip is EN-ST80RGBCX.
To Next Page
Loading...
