User Management
How do I share access to my AOne System with other users?
In order to allow someone to access your AOne system you need to share access to their email.
You can share the access to your Hub with up to 15 Devices.
In the Aurora AOne App, you can use the Share function, found in the Hub's page on the Set up
Devices Menu.
Type in the email of the user you wish to share the Hub with and choose whether you want this user
to be able to edit the System or not by tapping the "Allow User to edit" button. Once you have decided,
press Add User. When this person next logs into their account, they will be able to connect to your
Hub.
● Open App
● Tap Set up Devices
● Tap Hub
● Tap Share
● Enter email
● Tap allow User to edit
● Tap Add User
● Wait a few seconds
● The user should now be able to connect to the Hub
To remove a User from being able to have access to your System, tap their email on the Share screen,
then tap Remove. Refresh the screen and if their email is gone, you have been successful.
Differences between Control Permissions
There are currently two Access Modes you can set a Shared account or current Phone/Tablet to.
Full Control and Edit Mode
Full Control and Edit Mode allows the user to have the same permissions as the Hub owner.
You cannot remove the Hub from the account.
The user can create/remove/modify Spaces/Schedules/etc and even pair Devices.
Full Control Mode
Full Control Mode only allows the user to control the Spaces and Devices (On/Off, Brightness, Colour)
and activate Scenes.
The user cannot modify the Spaces (Name, Devices within Space), Schedules, etc.
This mode is best used for Showrooms or for Children’s bedrooms where limited access is required.
To Next Page
Loading...