How to set up a Rotary Dimmer in Slave mode on Samsung SmartThings
Slave mode is not officially supported on Samsung SmartThings.
You can however try the below:
Go to the following website (Samsung SmartThings IDE) and login using your account details:
https://graph.api.smartthings.com/
1. Click My Locations
2. Click Devices
3. Click on the Slave Dimmer
4. Scroll to the bottom
5. Click the Edit button in the bottom left
6. In Type* choose Zigbee Switch
7. Click Update
Add a Routine:
1. Open the SmartThings App
2. Go to Automations
3. Tap the +
4. Add Routine
5. Scroll down and tap Smart Lighting
6. Tap New Lighting Automation
7. Which Devices do you want to control? - Choose the Master Dimmer
8. What do you want to do? - Choose Mirror Behaviour
9. Mirror which switch? - Choose Slave Dimmer
10.Tap Next and name your Automation if you wish to.
Add a second Routine :
1. Scroll down and tap Smart Lighting
2. Tap New Lighting Automation
3. Which Devices do you want to control? - Choose the Slave Dimmer
4. What do you want to do? - Choose Mirror Behaviour
5. Mirror which switch? - Choose Master Dimmer
6. Tap Next and name your Automation if you wish to.
Tap Done when finished
Try the Master and Slave Dimmers
How do I contact AOne customer support?
If you need any further help or have any questions, please email us at aone.help@auroralighting.com,
raise a support ticket on Zendesk, via the AOne App.
To Previous Page
Loading...