AUTEC A08 - Product Overview and Support; A8+ Transmitting Unit Description; Conformity and Autec Contact Information; Warranty and Technical Assistance

2 Brief product presentation
2.1 Series, Radio Remote Control and Unit
The object of this part of the Manual is the A8+ (Model A08 Type LA5AM) Transmitting Unit
of an Air series' Autec Radio Remote Control.
Autec Air series' Radio Remote Controls are designed to be used on Machines and provide
a command interface to their command and control system, to be used from an appropriate
distance and position.
2.2 Conformity with standards
The conformity of Radio Remote Controls with standards and with working requirements and
conditions in the single Countries is provided in the related speci󰘰c part “Conformity and
frequencies” (Part B) of the Manual.
2.3 Contacts and useful addresses
The Radio Remote Controls are produced by Autec srl – Via Pomaroli, 65 – 36030 Caldogno
(VI) – ITALY.
You can 󰘰nd contacts for Autec, its distributors, dealers and authorized service centres on
the website www.autecsafety.com.
2.4 Warranty
General warranty conditions are indicated both in the relevant sheet provided together with
this documentation, and in the speci󰘰c page on the website www.autecsafety.com.
2.5 Technical assistance and spare parts
If you need technical services and/or spare parts, please refer to contacts provided in the
website www.autecsafety.com.
When applying for technical service to Autec, its distributors, dealers and authorized service
centres, the Radio Remote Control's serial number is required; you can 󰘰nd it on the
identi󰘰cation plate on the Transmitting Unit and/or on the Receiving Unit.
AUTEC - Air series
Brief product presentation 11
LIUA8BEN0_eng-01