Signal Meaning
The green [B] and red [A] LEDs are
steady on during start up.
A wrong "ID internal tx memory" has been inserted in the
Transmitting Unit, or this is a "BACK-UP UNIT".
The green [B] and red [A] LEDs
blink 3 times per second during
start up.
"ID internal tx memory" is damaged.
The green LED [B] is lit with a
steady light and the red LED [A]
blinks two times per second during
start up.
The START pushbutton is activated.
The green [B] and red [A] LEDs
blink alternating.
30 s left before the Unit automatically switches o.
The green LED [B] repeats the
sequence: 3 blinks and a pause,
and the red LED [A] is steady on
during start up.
The UNPAIR procedure has been carried out.
AUTEC - Air series
Light signals 17
LIUA8BEN0_eng-01
To Next Page
Loading...
