42
Main Section
1. Code section — displays the retrieved codes from the vehicle.
2. Description section — describes the retrieved codes in detail.
3. Status section — indicates the status of the retrieved codes.
4. Snowflake icon — only appears when freeze frame data is available
for viewing. Selecting this icon will display a data screen, which looks
and functions similar to the Read codes screen.
8.2.3 Erase Codes
After reading the retrieved codes from the vehicle and completing repairs,
erase the codes from the vehicle by using this function. Before performing
this function, make sure the vehicle’s ignition key is in the ON (RUN)
position with the engine off.
To erase codes
1. Tap Erase codes on the Function menu.
2. A message warning of DTCs and (or) freeze data will be deleted
should appear.
a) Tap Yes to continue. A confirmation screen will appear when the
operation is successful.
b) Tap No to exit.
3. Tap ESC on the confirmation screen to exit Erase codes.
4. Return to the Function menu and tap Read codes to verify.
To Next Page
Loading...
