51
12 Maintenance and Service
This chapter describes problems that you may encounter while using the
MaxiBAS BT508. Battery usage and service information is also introduced.
12.1 Maintenance Instructions
The following shows how to maintain your device, together with precautions to
take.
Do not use any abrasive cleansers, detergents, or automotive chemicals
on the tester.
Maintain all devices in dry conditions and keep them within normal
operating temperatures.
Do not store the devices in humid, dusty or dirty areas.
Check the housing, wiring, and connectors for dirt and damage before
and after each use.
At the end of each work day, wipe the device housing, wiring, and
connectors clean with a damp cloth.
Do not attempt to disassemble the tester.
Do not drop or cause severe impact to the device.
Use only authorized battery chargers and accessories. Any malfunction
or damage caused by the use of unauthorized battery chargers and
accessories will void the product warranty.
Ensure that the battery charger does not come in contact with conductive
objects.
To Next Page
Loading...
