34
Flag — displays when the Record function is applied. Tap to set flags to
mark points of interest when recording data. Notes can be added during
playback in Review or Data Manager. Select the preset flag to open a
popup window and display a virtual keyboard to enter notes.
Review — reviews the recorded data. Tap the Review button to display a list of
recordings. Select an item to review.
NOTE
Only data recorded during the current operation can be reviewed on the Live
Data screen. All historical recorded data can be reviewed in Review Data in the
Data Manager application.
Previous Frame — moves to the previous frame of recorded data.
Next Frame — moves to the next frame of recorded data.
Play/Pause — tap to play/pause the recorded data.
Show Selected — displays the selected parameters.
Graph Merge — merges selected data graphs.
Back — exits the review and returns to the Live Data screen.
Back — returns to the previous screen or exits the function.
4.4.2.4 Active Test
The Active Test function is used to access vehicle-specific subsystems and component
tests. Available tests vary by vehicle.
During an active test, the tablet sends commands to the ECU to activate the actuators.
This test determines the integrity of the system or part by reading ECU data, or by
monitoring the operation of the actuators. Such tests may include switching a solenoid,
relay or switch, between two operating states.
Selecting Active Test displays a menu of test options. Available tests vary by vehicle.
Select a test from the menu options. Follow the instructions displayed on the screen to
complete the test. Procedures and instructions vary by vehicles.
To Next Page