Autel MaxiCOM MK900 - System Settings; Unit Measurement Settings

59
Settings
Selecting Settings application opens a setup screen, on which you can adjust default
settings and view information about the MaxiCOM system. The following options are
available for the MaxiCOM system settings:
 Unit
 Language
 Printing Settings
 Report Settings
 Push Notifications
 Firmware Upgrade
 Auto Update
 Vehicle List
 Laws and Regulations
 System Settings
 About
This section describes the operation procedures for the settings.
8.1 Unit
This option allows you to adjust the measurement unit for the diagnostics system.
 To adjust the unit setting
1. Tap Settings on the Job Menu.
2. Tap Unit on the left column.
3. Select the appropriate measurement unit. A check mark will display to the right
of the selected unit.
4. Tap the Home button on the top-left corner to return to the Job Menu, or select
another setting option for system setup.