Autel MaxiSys Mini - MaxiFix Operations; Navigation, Search, and Community Features

Diagnostics Operations Generic OBD II Operations
50
4. Select a function option to continue.
 DTC & FFD
 I/M Readiness
 Live Data
 O2 Sensor Monitor
 On-Board Monitor
 Component Test
 Vehicle Information
 Vehicle Status
NOTE: Some functions are supported only on certain vehicle makes.
4.8.2 Function Descriptions
This section describes the various functions of each diagnostic option:
DTC & FFD
When this function is selected, the screen displays a list of Stored Codes and
Pending Codes. When the Freeze Frame data of certain DTCs are available
for viewing, a snowflake button will display on the right side of the DTC item.
The Erase Codes function can be applied by tapping the functional button at
the lower bottom of the screen.
Figure 4-16 Sample DTC & FFD Screen