Autel MaxiSys Mini - Chapter 7 Settings Operations; Operations; Unit; Language

66
Chapter 7 Settings Operations
Selecting Settings application opens a setup interface, on which you can adjust default
setting and view information about the MaxiSys system. There are seven options
available for the MaxiSys system settings:
 Unit
 Language
 Printing Setting
 Push Message
 About
 System Settings
7.1 Operations
This section describes the operation procedures for the settings.
7.1.1 Unit
This option allows you to adjust the measurement unit for the diagnostic
system.
 To adjust the unit setting
1. Tap the Settings application on the MaxiSys Job Menu.
2. Tap the Unit option on the left column.
3. Select the required measurement unit, Metric or English. A tick icon
will display to the right of the selected unit.
4. Tap the Home button on the top left corner to return to the MaxiSys
Job Menu. Or select another setting option for the system setup.
7.1.2 Language
This option allows you to adjust the display language for the MaxiSys system.