Automate Pulse 2 Hub Setup Instructions

A division of Rollease Acmeda Pulse 2 Hub | Setup Instructions for iOS and Android | 17
Name Shade
Pair With Remote
Name Shade
Pair Without Remote
Prepare Hub
Pair a Shade
Pair Method
Success
Type the custom name and
select save.
Make sure the remote is tuned
to the shade’s individual channel
(not Ch 0). Remove the remote
battery cover and press the upper
left P2 button Twice, then “Next”.
to the battery. The motor will jog
up and down.
The custom name will be
displayed and press next. The
shade name can be edited later.
Press and hold the P1 button on
the motor head ~2 seconds. The
motor will jog up and down once
and you will hear one audible
beep. Press ‘PAIR’ on the app
screen. Then press next.
Ensure the hub is close by then
press next.
Wait as the app connects and
pairs your shade. The shade will
respond that its been paired.
Choose your pairing method:
‘PAIR USING A REMOTE’ or ‘PAIR
DIRECTLY TO THE SHADE“
If the pairing process was
successful, Press ‘Done” or pair
another shade.
5
9a
6
9b
7
10
8
11

Automate Pulse 2 Hub Specifications

General

Brand	Automate
Model	Pulse 2 Hub
Category	Switch
Language	English