Automate Pulse 2 Hub Setup Instructions

4 | Pulse 2 Hub | Setup Instructions for iOS and Android A division of Rollease Acmeda
CAPABILITIES
• Motors per Hub: 30
• Locations per account: 5
• Hubs per location: 5
• Rooms per Location: 30 per Hub
• Scenes per Hub: 20 (100 per location)
• Timers per Hub: 20 (100 per location)
WHAT’S IN THE BOX?
UNPACKING THE HUB 2.0
APP NAVIGATION
A.
Automate Pulse 2 Hub
1.
Unpack the Pulse 2
Side Menu
Home
Create a list of your shades,
rooms and scenes in one place.
Shades
All the shades connected to
Pulse 2 Hub will appear here
Rooms
Add shades to Rooms and control
an entire room with 1 button
Scenes
Create a Scene that sets your
shades to a particular position eg
Sunrise (all Open)
Timers
Show a list of Timers that can
activate a scene or a single device
App Version 3.0
Supported Device Types
iOS 11 and higher Device Types, Android OS 6.0 OR HIGHER
Mobile and Tablets - Tablet (Landscape is supported)
Reorder / Edit
Shade Health Indicator
Tile
Shade Type
Shade Position
Shade Name
Associated Bedroom
B.
USB Power Supply
2.
Check the Box Contents
C.
32” (80cm) USB
Power Cord
3.
Plug the USB Cord into the
Power Supply
D.
Ethernet cable
4.
Connect the Micro USB end
into the back of the Pulse 2
D.
Ethernet cable
5.
Plug the Power Supply into
the outlet and place the
Hub in a central location in
your home
1
2
3
4
5
1 2 3 4 5

Automate Pulse 2 Hub Specifications

General

Brand	Automate
Model	Pulse 2 Hub
Category	Switch
Language	English