Automationdirect.com HX-ECOM Series - Do-More

Ethernet Communications Modules, 3rd Edition, Rev. D
B-10
Appendix B: General Specifications
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Do-more
This configuration causes the Do-more on-board Ethernet port to:
• Take whatever data is in the Do-more's PL160-175 and write (publish) it as
Block Number 10.
• Read (subscribe) to all block data. The Do-more has specially allocated memory
(PL = Peerlink memory) and cannot be configured to ignore any blocks as is
indicated in the text of the PEERLINK instruction itself.
• Ignore (inhibit) updates to blocks it subscribes to via a runtime level control
(e.g. PL.B0Inh, PL.B1Inh, etc. bits).
NOTE: For more information on how to do Peerlink in Do-more, please see the Do-more Designer Help file
under the PEERLINK instruction.