Automationdirect.com HX-ECOM Series - Quality Technical Support; Conventions Used; Key Topics for each Chapter

Ethernet Communications Modules, 3rd Edition, Rev. D
1–3
Chapter 1: Introduction
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Quality Technical Support
We strive to make our manuals the best in the industry. We rely on your feedback to let
us know if we are reaching our goal. If you cannot find the solution to your particular
application, or, if for any reason you need technical assistance, please call us at:
770–844–4200
Our technical support group will work with you to answer your questions. They are available
Monday through Friday from 9:00 A.M. to 6:00 P.M. Eastern Time. We also encourage you
to visit our web site where you can find technical and non-technical information about our
products and our company.
http://www.automationdirect.com
If you have a comment, question or suggestion about any of our products, services, or
manuals, please fill out and return the Suggestions card that was included with this manual.
Conventions Used
When the “notepad” icon is in the left–hand margin, the paragraph to its immediate right
will be a special note. The word NOTE in boldface will mark the beginning of the text.
When the “exclamation mark” icon is in the left–hand margin, the paragraph to its immediate
right will be a warning. This information could prevent injury, loss of property, or even death
(in extreme cases). The word WARNING in boldface will mark the beginning of the text
which will also be in boldface..
Key Topics for Each Chapter
The beginning of each chapter will list the key topics that
can be found in that chapter.
Getting Started
CHAPTER
1
In This Chapter...
.................................................................1-2
...........................................................................1-4Specifications
General Information