Introduction
Purpose of this Manual
ank you for purchasing the AutomationDirect CLICK PLUS PLC family of products.
is hardware user manual provides information that will help you install, set up, program,
troubleshoot, and maintain your CLICK PLUS PLC system. e manual includes information
that is critical to the safety of the personnel who will install and use the PLC, as well as the
integrity of the machinery, processes, and equipment controlled by the PLC.
e manual also includes important information about power and signal wiring, mounting of
the PLC, and conguring the PLC system.
About Getting Started
If you are familiar with PLCs in general, then following the simple steps in this rst chapter
may be all you require to start being productive using a CLICK PLUS PLC system. After you
have completed these simple steps, your CLICK PLUS PLC will be running a ladder logic
project that you programmed. If you are new to the world of PLCs, be sure to read through all
of the chapters in this hardware user manual.
Supplemental Manuals and Other Help
e CLICK Programming Software, C0-PGMSW, can be downloaded free from the
AutomationDirect web site (link shown below under Technical Support). Both this Hardware
User Manual, C2-USER-M, and the Software Installation Guide are free as a download. e
CLICK Programming Software includes searchable online help topics covering all aspects of
the software and instruction set.
Technical Support
We strive to make our manuals the best in the industry. We rely on your feedback to let us
know if we are reaching our goal. If you cannot nd the solution to your particular application,
or, if for any reason you need technical assistance, please call us at:
770–844–4200
Our technical support group will work with you to answer your questions. ey are available
Monday through Friday from 9:00 A.M. to 6:00 P.M. Eastern Time. We also encourage you
to visit our web site where you can nd technical and non-technical information about our
products and our company.
http://www.automationdirect.com
CLICK PLUS PLC Hardware User Manual, 1st Edition, Rev. K – C2-USER-M
1-2
Chapter 1: Getting Started
To Next Page
Loading...
Need help?
General
