Autonics CX Series User Manual

6 Timer mode
68 © Copyright Reserved Autonics Co., Ltd.
Output
mode
Time chart
OND.2
[ONd2]
Power ON Delay 2 (Power Hold)
1)Power ON Time Start (there is no INA function)
2)RESET ON: Time RESET
RESET ON→OFF: Time Start
3)Control output operates as retained (Hold) or one-shot
output.
4)It memorizes display value at the moment of power
OF F.
OND.3
[ONd3]
Signal ON Delay 3 (Power HOLD/RESET)
1)Power ON Time Start (there is no INA function)
2)RESET ON: Time RESET
RESET ON→OFF: Time Start
3)Control output operates as retained (Hold) or
one-shot output.
4)If time reached setting time at the moment of power
ON, it is automatically reset.
※Power RESET: There is no memory protection. (resets the display value when power is off)
※Power Hold: There is memory protection. (memorizes the display value at the moment of
power off, indicates the memorized display value when power is resupplied.)

Autonics CX Series Specifications

General

Brand	Autonics
Model	CX Series
Category	Timer
Language	English