Autonics CX Series - 6.4 Timer 0 time setting

6 Timer mode
© Copyright Reserved Autonics Co., Ltd. 77
6.4 Timer ‘0’ time setting
6.4.1 Timer output mode for ‘0’ time setting
OND, ONd1, ONd2, ONd3, NFD, NFd1
6.4.2 Operations by output mode (‘0’ time setting)
(1) OND (Signal ON Delay) mode [OND]
 Set ‘0’ for setting time 1.
1) UP mode
2) DOWN mode
 Set ‘0’ for setting time 2.