Do you have a question about the Autronica AutroGuard V-530 and is the answer not in the manual?
Category | Security Sensors |
---|---|
Type | Flame Detector |
Field of View | 90 degrees |
Operating Temperature | -40°C to +70°C |
Humidity | 0 to 95% RH, non-condensing |
IP Rating | IP66 |
Power Supply | 24 VDC |
Output | Relay and 4-20 mA |
Material | Stainless Steel |
Certifications | ATEX, IECEx, FM |
Highlights critical safety warnings, warranty disclaimers, and liability limitations.
Specifies the protector's intended application within Autronica fire detection systems.
Provides guidelines for safe installation, operation, and maintenance of products.
States that product modifications are not allowed and disclaims liability for changes.
Details the different AutroGuard protector series and variants available.
Provides information and matrices for ordering AutroGuard V-430 and V-530 variants.
Details dimensions, materials, ingress protection, and current consumption.
Covers sound pressure levels, current consumption, and sound patterns.
Details VAD intensity settings, current consumption for white and red LEDs.
Describes the DYFI3D technology for analyzing smoke signatures.
Explains the dynamic filtering functions (smouldering, transient, pollution) for false alarm reduction.
Details sensitivity classes (High, Medium, Low) for adapting to different environments.
Explains the automatic self-test function for sensor verification and system integrity.
Covers factors for selecting VAD intensity and configuration options (High, Medium, Low, Open).
Stresses the importance of adhering to local regulations for installation.
Outlines requirements for location, required space, and mounting considerations.
Provides guidance on area coverage and monitoring distance for smoke and heat detection.
Explains cable requirements, wire routing, stripping, and connection methods.
Details how to access and configure system settings, including detector defaults.
Guides on setting default properties for different protector variants and add-ons.
Covers individual settings for Fire Alarm Devices, Automatic Test Mode, and Cover Detection.
Recommends using the SelfVerify® 2.0 function for automated protector tests.
Outlines manual testing procedures and recommended test equipment (Testifier®).
Details the process for replacing protectors during normal operation without system breaks.