Autronica AutroGuard V-530 - Autroguard Individual Settings; Fire Alarm Devices; Automatic Test Mode

Configuration
Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29,
Autronica Fire and Security
Page 74
10.6 AutroGuard Individual Settings
10.6.1 Fire Alarm Devices
AutroGuard® protectors with visual and/or audible alarm devices
(FADs), may include the following:
 Sounder
 Sounder and visual alarm device
 Voice alarm (not yet available)
 Voice alarm (not yet available) and visual alarm device
 Visual alarm device
 From the system view, select the AutroGuard® Protector
 Click the dropdown button and select the relevant Alarm Device
10.6.2 Automatic Test Mode
The Automatic Test Mode is used during manual testing with a test
kit (see chapter 11.3.3).
Automatic Test Mode can be enabled (ON) or disabled (OFF) per
protector by means of the Configuration Tool.
 From the system view, select the AutroGuard® Protector
 To enable automatic test mode for a protector, check the
checkbox Automatic Test Mode
Refer to chapte 11.3.3 Automatic Test Mode.