Avantree Orbit Pro - Specifications

ORBIT PRO
User Manual
The Orbit Pro comes with a remote controller that
enables you to adjust the volume of your Orbit Pro
from a distance. Simply press the “+” and “-“ buttons on
the remote to adjust the volume to your preference.
If your remote runs out of power, you can replace the
battery with any CR2025 3V Lithium battery. Use your
thumb and index nger simultaneously to squeeze
and pull the battery tray o the remote, replace the
dead battery with a fresh one, then push the tray
slightly to slide it back into place.
Using the Remote
Specications
Bluetooth version v5.0
Audio input ports
Optical, AUX 3.5mm, RCA(only for
TV); HDMI ARC
Supported audio
format
Dolby/DTS; PCM/LPCM
Supported proles A2DP, AVRCP
Audio codecs aptX low latency, FastStream,aptX, SBC
Operating range
Battery for the remote
Product dimensions
Input voltage / current
Net weight
Upto164ft/50m
CR2025 Lithium cell 3V
8.5 cm x 8 cm x 10 cm
DC5.0V / 500Ma-2A
225g
22
EN