5000 Series Switch Model Key features
receptacles, which support 1000W AC or
DC power supply modules.
Common hardware features
The following hardware features are part of all 5000 Series switches:
• Two stack connectors, each operating an aggregate 80 or 144 Gbps
• Mode Select push button (formerly known as UI push button)
• LED display panel
• Console port (DB-9 connector)
• Two 10/100/1000 Mbps copper Ethernet diagnostics ports
• USB 2.0 Type-A port
The following figure shows the front panel of the 5698TFD switch.
The following figure shows the rear panel of the 5698TFD switch. Not all 5000 Series switches
have a USB port on the rear panel. See Universal Serial Bus ports on the Avaya Ethernet
Routing Switch 5000 Series on page 15 for information about switches that have the rear-
panel USB port.
Installation fundamentals
14 Installing Avaya Ethernet Routing Switch 5000 Series December 2013
Comments? infodev@avaya.com
To Next Page
Loading...
