Figure 8: Table or shelf mount
Mounting on a wall
This procedure describes how to mount a 5000 Series switch on the wall.
Before you begin
• Phillips #2 screwdriver
• Wall anchors and screws
About this task
One 1U 5600 Series switch weighs approximately 30 lbs (13.6 kg). Ensure you choose
fasteners appropriate for the weight of the unit. Avaya recommends that two people lift and
install a 5600 Series switch.
Procedure
1. Attach the brackets to each side of the device, as shown in the following job aid.
2. Secure the brackets to the wall using appropriate screws and wall anchors (not
provided), as shown in the following job aid.
Procedures for installation of the switch
48 Installing Avaya Ethernet Routing Switch 5000 Series December 2013
Comments? infodev@avaya.com
To Next Page
Loading...
