Assembling the 9400 Series Digital Deskphones
Issue 1 August 2011 17
Figure 4: Multiple BM12 Button Modules connected to a 9408 Digital Deskphone
To connect cords to jacks on the 9400 Series Digital Deskphones:
1. Plug one end of the modular line cord into the line jack on the 9400 Series Digital
Deskphone.
2. Plug the other end of this cord into the wall jack.
If you are connecting a BM12 Button module to a 9408 telephone:
1. Plug one end of the cord that shipped with the BM12 Button module into the jack on the
BM12 Button module.
2. Plug the other end of the cord that shipped with the BM12 Button module into the MOD jack
on the 9408 telephone.
3. Plug one end of the line cord that shipped with the 1151C power supply into the IP/DCP
PHONE jack on the 1151C power supply.
4. Plug the other end of the line cord that shipped with the 1151C power supply into the line
jack on the 9408 telephone.
5. Plug one end of the modular line cord into the LAN/PBX jack on the 1151C power supply.
6. Plug the other end of the modular line cord into the wall jack.
7. Plug the power cord of the 1151C power supply into the wall electrical socket.
To Next Page
Loading...
