9400 Series Digital Deskphones Installation
12 Avaya 9400 Series Digital Deskphones Installation and Maintenance Guide
Assembling the 9400 Series Digital Deskphones
!
CAUTION:
CAUTION: Be careful to use the correct jack when plugging in the telephone. The jacks are
located on the back of the telephone housing and are flanked by icons to
represent their correct use.
Figure 1
, Figure 2, and Figure 3 show how to connect cords to jacks on the 9400 Series Digital
Deskphones. Before installing these telephones, keep in mind the following information:
● All 9400 Series Digital Deskphones are powered from the switch unless using a BM12
Button module, which requires an 1151C power supply.
● The number of BM12 Button modules you can connect to a 9408 telephone depends on
the Avaya Aura Communication Manager software installed.
- For Avaya Aura Communication Manager Release 5.2.1 Service Pack 8 software, you
can connect one BM12 Button module to a 9408 telephone.
- For Avaya Aura Communication Manager Release 6.0.1 Service Pack 1 software:
● If you alias a 9408 telephone as a 2420 telephone, you can connect one BM12 Button
module to the 9408 telephone.
● If you alias a 9408 telephone as a 1416 telephone, you can connect up to three BM12
Button modules to the 9408 telephone. However, you can only administer eight of the
call appearance/feature buttons on the third BM12 Button module.
- For Avaya Aura Communication Manager Release 6.2 software, you can connect up to
three BM12 Button modules to a 9408 telephone.
Note:
Note: The BM12 Button module requires an external power supply (that is, the 1151C
power supply). You must order the 1151C power supply separately.
9. Verify that the 9400 Series Digital Deskphones package includes the following
components:
● 1 telephone set with stand.
● 1 handset capable of transmitting and receiving 3.4 kHz audio.
● 1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord,
plugged into the telephone and the handset.
● 1 2-wire line cord.
To Next Page
Loading...
