Avaya 9400 series - Upgrading the Firmware and Other Files for 9400 Series Digital Deskphones

9400 Series Digital Deskphones Installation
18 Avaya 9400 Series Digital Deskphones Installation and Maintenance Guide
Upgrading the Firmware and Other Files for 9400 Series
Digital Deskphones
Perform the procedure in this section to upgrade the firmware and other files for 9400 Series
Digital Deskphones.
Note:
Note: If your system has MM312, MM712, or MM717 DCP boards, you must update the
firmware for these boards to V14 before upgrading the firmware for the 9400
Series Digital Deskphones.
The 9400 Series Deskphones can download the following files from the TFTP server:
● boot file (for example, boot94xxR018.bin)
● firmware file (for example, 94xxR19.bin)
● language file (for example, 94xxlng_R18_v07_Pack01.bin)
● font file. The font file can contain the following font sets:
- Simplified Chinese (GB.bin)
- Traditional Chinese (TradCh5.bin)
- Korean (KSC.bin)
- Japanese (JIS.bin)
Note:
Note: Font files are only supported on Avaya Aura Communication Manager Release
6.0.1 and later.
● Zarlink (DSP) file (for example, Zarlink_CM_IPO_R0_07.bin)
Note:
Note: The Zarlink (DSP) file is only used with 9408 Digital Deskphones.
Before upgrading the firmware and application type files, make sure you have the following:
● the latest firmware for the 9400 Series Digital Deskphones. You can download the latest
firmware from http://www.avaya.com/support
.
● the IP address of your TFTP server
● the computer name (that is, node name) where your TFTP server is running
● For a G650 system: a TN2214 or TN2224 DCP board
● For a G700/450/350 system: an MM312, MM712, or MM717 DCP board