2. Select the person or number that you want to call.
3. Locate the contact that you want to call by typing the name of the person as
listed.
For example, if you added John Smith to your contacts List as “Smith, John”, start
typing his last name rather than his first name. Each time you press the dialpad, the
list display shifts to match your input. Alternately, you can scroll up or down to locate
the contact.
4. Press Call, OK, or the line appearance to call the selected contact.
Calling a person from the call history
Procedure
1. Press the History button.
2. Scroll to the left or right to view a separate list of all calls, missed (unanswered)
calls, answered calls, or outgoing calls.
3. Scroll up or down to select the person or number you want to call.
4. Select the person or number you want to call.
5. Press the Call softkey or the OK button.
Calling a person from the directory
About this task
If your administrator has set up a company directory you can use the Contacts button to search
through the directory, then call the person you found.
Note:
Use the Contacts button on the phone to initiate either a directory search as described here
or to find a contact on your personal Contacts list. To locate a person on your Contacts list,
see
Searching for a contact on page 49.
Procedure
1. Press Contacts.
2. Press More.
Making a call
38 Using Avaya one-X
™
Deskphone SIP for 9601 IP telephone April 2013
Comments? infodev@avaya.com
To Next Page
Loading...
