Picking up a call from your pickup group
About this task
When your administrator has set up your phone as part of a "pickup group" use the Call Pickup
feature to answer any other phone in the group.
Procedure
1. From the Phone screen, scroll right to access the Features menu.
2. If necessary, scroll down to Call Pickup and press OK or just press the
corresponding line button.
3. Answer the call as you normally would.
Calling someone in your intercom group
About this task
If your system administrator has set up an intercom group, you can call anyone in that group
by pressing a few numbers.
Procedure
1. Before dialing, scroll right from the Phone screen to access the Features menu.
2. If necessary, scroll down to Dial Icom and press OK or just press the corresponding
line button.
The intercom group number shows next to the Dial Intercom feature and the next
denotes the extension your administrator has predefined as your automatic
intercom destination extension.
3. Press the number(s) that corresponds to the destination extension.
4. Press Enter or OK to activate the intercom call to that extension, where the call
appearance identifies the incoming call with your name followed by ICOM.
Picking up a call from your pickup group
Using Avaya one-X
™
Deskphone SIP for 9601 IP telephone April 2013 77
To Next Page
Loading...
