2. If necessary, scroll down to Auto Icom and press OK or just press the corresponding
line button.
Two numbers display with the Auto Icom feature, for example “Auto icom 2 3”. The
first number denotes the intercom group number for the Dial Intercom feature. The
next number denotes the extension your administrator has predefined as your
automatic intercom destination extension.
3. Press the number(s) that corresponds to the destination extension.
4. Press Enter or OK to activate the intercom call to that extension, where the call
appearance identifies the incoming call with your name followed by ICOM.
Call Forwarding when your line is busy or if you do not
answer
About this task
Use this task to set a number to which your calls are forwarded when your line is busy or when
you do not answer a call. You must enter the telephone number where the calls are forwarded
each time you use this feature.
Procedure
1. If your deskphone is a 9601, 9608, or 9621, from the Phone screen, scroll right to
access the Features menu.
2. Select Call Fwd Busy/No Ans.
3. Enter the number to which you want to forward your calls.
After you enter the forwarding number, you hear a confirmation tone.
4. Press OK to turn call forwarding off if it is already on.
Blocking your extension from displaying during calls
About this task
You can override the system (default) setting to display your extension on outgoing calls. Use
the Calling Party Number Blocking feature to prevent your number from displaying.
Procedure
1. From the Phone screen, scroll right to access the Features menu.
Call Forwarding when your line is busy or if you do not answer
Using Avaya one-X
™
Deskphone SIP for 9601 IP telephone April 2013 73
To Next Page
Loading...
