Setting the audio path
You can set your phone to go off-hook on the Speaker or the Headset when you make an on-
hook call.
Procedure
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Audio Path.
7. Press Change or OK or use the Right/Left arrows to change the Speaker or
Headset setting.
8. Press Save.
Setting dialing options
About this task
Your phone has two dialing options. You can dial as you normally would, for example, pick up
the handset, get a dial tone, and dial the number you want (off-hook dialing). Or, you can set
"edit dialing" which mimics how you dial a call on a cell phone - you can enter all or part of the
number, backspace to correct a digit if needed, and when ready, initiate the dialing process
using a softkey.
Note:
Edit dialing may not be available to you, depending on how your system is administered.
Procedure
1. Press Avaya Menu.
2. Select Options & Settings...
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Dialing options.
Using options and settings
Using Avaya one-X
™
Deskphone SIP for 9601 IP telephone April 2013 21
To Next Page
Loading...
