Avaya BCM50 - Setting the System Name

BCM50 System Start Up
NN40010-318 Issue 1.2 BCM50 Rls 6.0 31
Attribute
Value
Description
node is used only as a last resort.
Default: H-node
Lease time(s)
<numeric string>
The amount of time before a DHCP lease expires and the
device must request a new IP address.
Default: 604800 seconds
Setting the System Name
This name is used for identification purposes.
1. From the Configuration tab, open the System folder to expand it.
2. Select Identification from the System folder.
3. Enter a name for your system in the System name field, and press the
tab key.
4. A dialog box will appear advising you of any system interruptions. Click
OK to continue.