Avaya BCM50 - Media Bay Modules Configuration

BCM50 System Start Up
38 NN40010-318 Issue 1.2 BCM50 Rls 6.0
Attribute
Description
From Line
Enter the line number of the first line in the range of lines you
want CallPilot to answer. CallPilot answers the range of lines
between this line and the line you enter in the To Line box.
To Line
Enter the line number of the last line in the range of lines you
want CallPilot to answer.
Number of rings
Enter the number of rings you want CallPilot to wait before
answering lines.
Media Bay Modules
Media Bay Modules can be defined in two main categories:
 Trunk Media Bay Modules
 Station Media Bay Modules
There are also specialised modules that, for example, provide a combination
of both lines and extensions.
Media Bay Module Configuration
All configurations in this section are performed in Element Manager
Configuration.
Note: Keycodes are required for the Expansion Ports to function. Ensure
these have been entered (refer to the Software Keycodes section of this
guide).
When the Media Bay Modules are configured, the status lights will stop
flashing.
Configuring the Media Bay Modules
1. In Element Manager Configuration tab, open the Resources heading,
and click on Telephony Resources.