DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN
555-233-121
Issue 2
November 2000
About This Document
xviiStandards compliance
Standards compliance
The equipment presented in this document complies with the following (as
appropriate):
LASER Product
The DEFINITY ECS may contain a Class 1 LASER device if single-mode fiber
optic cable is connected to a remote expansion port network (EPN). The laser
device operates within the following parameters:
Maximum Power Output: -5 dBm
Wavelength: 1310 nm
Mode Field Diameter: 8.8 µm
CLASS 1 LASER PRODUCT
IEC 825 1993
!
DANGER:
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Contact your Lucent Technologies representative for more information.
ITU-T (Formerly CCITT) ANSI Australia AS3260
ECMA FCC Part 15 and Part 68 IEC 825
ETSI EN55022 IEC950
IPNS EN50081 UL 1459
DPNSS EN50082 UL1950
National ISDN-1 UNI 3.1 CSA C222 Number 225
National ISDN-2 CISPR22 TS001
ISO-9000 Australia AS3548 (AS/NZ3548) ILMI 3.1
To Next Page
Loading...
