SREPN Installation
1-1Check customer’s order
1
DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN
555-233-121
Issue 2
November 2000
1
SREPN Installation
Check customer’s order
Check the customer’s order and the shipping packing lists to confirm that all
equipment is present. If any equipment is missing, report this to your Avaya
representative.
Correcting shipping errors
1. Red-tag all defective equipment and over-shipped equipment and return
according to the nearest Material Stocking Location (MSL) instructions. For
international customers, contact your order service agent.
2. Direct all short-shipped reports to the nearest MSL. Contact the
appropriate location for specific instructions. For Streamlined
Implementation in the United States, call 1-800-772-5409.
Unpack and inspect
READ THIS FIRST!
!
CAUTION:
A fully loaded system weighs approximately 48 lbs (22 kg). Use lifting precautions.
1. Verify the equipment received. See Figure 1-1 on page 1-2. Actual
equipment may vary in appearance and may ship in separate packages.
2. Refer to Table 1-1 on page 1-3 through Table 1-7 on page 1-6 for a list of
Survivable Remote Processor (SRP) and Expansion Port Network (EPN)
parts and comcodes.
To Next Page
Loading...
