DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN
555-233-121
Issue 2
November 2000
SREPN Installation
1-11Install the SRP cabinet
1
Install cabinet clips (Systems without
earthquake protection)
A cabinet clip is required between each pair of stacked cabinets.
At the front of the cabinets, install a cabinet clip between each pair of cabinets by
hooking the clip into the slot of the upper cabinet and snapping the straight leg of
the clip into the slot on the lower cabinet. See Figure 1-4.
Figure 1-4. Location of Cabinet Clips
Figure Notes
1. Control Cabinet
2. Port Cabinet or Duplicated Control Cabinet
3. Port Cabinet
4. SRP Cabinet
5. Cabinet Clips
To Next Page
Loading...
