Console operations
6 DEFINITY ECS Console Operations Quick Reference
Figure 3. DXS selector console
The following list items correspond with the callouts shown in Figure 1, Figure 2,
and Figure 3. All the feature buttons, trunk access buttons, and display buttons are
on this console. The DXS Selector Console allows you to dial an extension
number and view the status for each extension.
■ Lamp test switch — This is a switch under the front panel of the
Model 302A/B console that allows you to test the console lamps. The test
starts when you press the switch and stops when you release the switch.
On the Model 302C/D console, you must simultaneously press and hold the
POS BUSY and VOLUME UP buttons to test the console lamps and display. The
test starts when you press the buttons and stops when you release the
buttons.
■ Handset — For the 302D console, this is a standard handset with coiled
cord and a modular plug. The handset on the 302D console connects to the
bottom front of the console. The handset can be unplugged from the
console and replaced with a headset that also uses a modular plug.
For the 302A/B/C, this is a standard handset with coiled cord and a
dual-prong, phone-plug connector. The handset on the 302A/B/C console
connects to the left or right side of the console. The handset can be
unplugged from the console and replaced with an amplified headset that
also uses a dual-prong, phone-plug connector.
1. DXS/BLF buttons 2. DXS hundreds group select buttons
10 11 12 13 14 15 16 17 18 19
00 01 02 03 04 05 06 07 08 09
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
phdgdxs KLC 031199
1
2
To Next Page
Loading...
Need help?
General
