ESS Installation
120 Avaya Enterprise Survivable Servers (ESS) Users Guide
2. On the Set Server Identities web page: Enter the unique Server ID in the ID field (1-99).
The ID field can be found to the right of the Host Name field.
You assign a unique Server Identification number (SVID) to each server. The SVID must be
in the range of 1 to 99. Each server in a server pair (S8700 series media servers) requires a
different SVID. You can assign the SVID sequentially or allow gaps in the numbering such
as 10, 20, 30, etc.
Note:
Note: Each Server ID in an enterprise must be unique. You will enter the Server ID in
the system-parameters ess form when you administer ESS. You cannot
enter duplicate server IDs in this form.
3. On the Configure Enterprise Survivable Server web page:
a. Select the server type:
● For an ESS server select:
- This is an enterprise survivable server with an S8700 series media server as
the main server, or
- This is an enterprise survivable server with an S8500 media server as the
main server.
● For a Main server select:
- This is NOT an enterprise survivable server, and select Change.
b. For the ESS server, complete the following fields under the section you selected in the
previous step (step a):
● Enter the CLAN IP address that will be used when the ESS server registers with the
Main server. See CLAN access for ESS registration
on page 65 for more information.
● Enter the IP address(es) for the Main server. This IP address(es) will be used for
synchronizing the translation file between the Main server and the ESS server.
To Next Page
Loading...
Need help?
General
