ESS Installation
128 Avaya Enterprise Survivable Servers (ESS) Users Guide
b. The Active Server ID field is the Server ID that was entered for this server in the Set
Server Identities web page during configuration. For duplex servers, the Active Server
ID is active for the pair of servers.
c. The Registered? field is ’y’. If there is a ’n’ in this column, the ESS server is not
registered and no data will appear in the Translation Updated or Software Version
columns. It may take several minutes for the ESS server to register to the Main server. To
troubleshoot the ESS registration see Enterprise Survivable Server - Troubleshooting
on
page 164.
● The Translations Updated column:
a. For Cluster ID 1 (the Main server): The Translations Updated column correlates with
the time of the last successful save translation command.
b. For all other Cluster IDs: The Translations Updated column correlates with the date
and time of the last successful translation download from the Main server.
● The Software Version field indicates Communication Manager 3.0 or later.
See Figure 38
for an example of the output of the status ess clusters command.
Figure 38: Status ess clusters
Note:
Note: The ESS software version will not appear until the ESS server registers with the
Main server for the first time.
2. display system-parameters ess
Verify that:
● CL ID: This number matches the same value as the MID in the license file.
● Platform Type: This column reads simplex if it is an S8500 Media Server, or duplex if
it is an S8700 series media server.
To Next Page
Loading...
Need help?
General
